Pool Care Guide

Pool Care Guide

The Clear Result Pool Care Guide will lead you step by step, from opening to closing. Your pool's design, equipment and your geography will effect the quality of your bathing experience. Consult your local Clear Result dealer or contact us to answer your specific questions.

Calculate the size of your pool

Knowing the size of your pool is important. So if you are not sure how many gallons of water are in your pool, use the appropriate calculator below to get an approximate idea.

Rectangular Pools

Circular Pools

Oval Pools

Step 1. Equipment Start Up

A healthy pool depends on proper chemical treatment of the water and equipment that is in good working order.

If you drained water to winterize your pool, the first step is to refill the pool to a level that allows your skimmer to easily pull water for re-circulation.

Next, you need to clean your filter, using Clear Result Filter Clean according to the label directions for your type of filter. A clean filter is important to properly treat your water and keep it sparkling, clear and beautiful.

Once the filter is cleaned and re-installed, turn on circulation equipment (pump and filter) following manufacturer’s directions. Clear Result recommends running your pump and filter at least 12 hours a day, more if the pool is in use or after heavy rains.

Step 2. Testing and Balancing the Water

Proper water balance is critical to operating your pool. Water that is not properly balanced makes chemical treatments less effective and can damage the pool and its equipment.

After the water in your pool has cycled through at least one full circulation, take a water sample with a sample bottle or any clean, resealable container. Take the sample at a depth of about 18 inches, or elbow depth, away from the return outlets. Seal the container and bring the water sample to your authorized Clear Result dealer for free water analysis. The goal of testing and analyzing water is to get the information needed to properly balance the water chemically. See the chart below for ideal ranges of proper water balance:

Your Clear Result dealer can tell exactly what is needed to prepare your pool water for the season. We’ll help you select the right products in the right quantities for your pool’s specific needs.

Ideal Ranges

7.4 - 7.6

Total Alkalinity
Gunite Pools 100 -150 ppm
Vinyl or Other 125 - 175 ppm

Calcium Hardness
Gunite Pools 200 - 275 ppm
Vinyl or Other 180 - 250 ppm

0 ppm

50 ppm

UV Block (Cyanuric Acid)
30-50 ppm

Chlorine (If Chlorine sanitizer)
1-3 ppm

3-5 ppm

Step 3. Water Balance Factors

Clear Result has all your water balance needs covered.

pH is the most important factor in water balance. The pH is a measurement of the relative acid or base of the water. If water falls out of balance on the low side, it becomes corrosive, attacking pool surfaces and equipment. If it should rise out of balance on the high side, scale build-up can occur, leaving unsightly deposits. Readings between 7.4 and 7.6 are considered acceptable for swimming pool water. Test the pH at least twice a week during the summer season. Daily testing is recommended.

Total Alkalinity (TA)
Total Alkalinity is a measure of the alkaline materials dissolved in the water, which helps keep the pH at the proper level. The waters ability to resist pH changes depends on the amount of this alkaline material in the water. The recommended Total Alkalinity range for gunite pools is 100-150 ppm and vinyl pools 125-175 ppm. If the Total Alkalinity is low, the result is pH will bounce in and out of range. If Total Alkalinity is too high, it becomes very difficult to adjust the pH as needed. Testing the Total Alkalinity is recommended about twice a month.

Calcium Hardness (CH)
Calcium Hardness refers to the amount of dissolved minerals in the water. Proper Calcium Hardness levels for gunite pools range between 200-275 ppm and 180-250 ppm for vinyl pools. A low Calcium Hardness can lead to corrosion of equipment or etching of a plaster finish. Calcium Hardness too high causes cloudy water and scaling. Test Calcium Hardness levels at least monthly during the summer season.

Stabilizer (Cyanuric Acid – CYA)
Sunlight causes the amount of chlorine in your pool water to decrease. Stabilizers (Cyanuric Acid) protect the chlorine from the sun’s rays increasing the life efficiency of the chlorine. Proper Cyanuric Acid levels range between 30-50 ppm. Monthly testing is recommended.

Step 4. The Critical Difference: Enhancing Your Pool’s Performance

This is where Clear Result differs from other pool treatment systems. Our "unique formula" is Clear Result Activator, a product that makes caring for your pool, time and money-saving and refreshingly simple.

Activator is a product that makes your pool water sparkling blue and easy on the skin and eyes, while helping to prevent algae growth. It also makes regular maintenance and sanitization simpler and less expensive.

Activator essentially solves problems before they start with an easy, once-a-season treatment. The only way that Activator is lost from your pool water is through filter backwash, splash out, or a leak, so there is no need to add extra product except in these cases.

When starting your pool, the goal is to achieve an Activator level of 50 ppm. This level can be easily determined by your authorized Clear Result dealer.
Follow label directions to determine the amount of product needed to achieve the proper level of Activator.

Step 5. Sanitizing Your Pool

If not properly sanitized, bacteria, algae, and organic wastes can build up in pool water, making it become cloudy and uncomfortable with an unpleasant odor. Besides, water that isn't sanitized is, well . . . unsanitary.

Chlorinating and Brominating compounds have been effectively used for decades to ensure the safety and comfort of pool water. That’s why Clear Result offers many options for regular chlorination or bromination.

There are several ways to add these products to your pool water. Follow manufacturer’s directions for operating any automatic feeding equipment you may have and follow the Clear Result label directions for applying sanitizers. Your Clear Result dealer can help you decide which sanitizer method is best for you.

Options for Chlorinating Your Pool
Clear Result Clear Tabs – These special 3-inch tabs are an enhanced blend of chlorinating compound and Clear Result Activator. They provide both chlorine residual and a constant addition of Supreme to help keep proper levels in the case of heavy use or "splash out" from the pool.

Clear Result Tabs and Clear Result Sticks – These are highly effective at providing regular chlorination to your pool water, containing a UV Block in its blend to protect the chlorine from loss to the sun’s ultra-violet rays. Its 90% available chlorine makes sanitation of your pool simple.

Clear Result Granular Di-Chlor – This is a basic granular chlorinating product which is added periodically directly to the pool water by broadcasting it over the surface of the water. It quickly dissolves and is safe for all pool surfaces. It also contains a UV Shield to prevent loss of chlorine to the sun’s rays.

Bromination Options
Clear Result Bromine Tabs – These 1-inch tabs are an easy and effective way to sanitize your water with active Bromine. Bromine is highly stable in direct sunlight or heat, and is sometimes preferred as an alternative to chlorine.

Choosing a Sanitizer
Any of these sanitizing products offered by Clear Result will effectively treat your pool, but you should consult with your authorized Clear Result dealer to determine exactly which product best meets your needs. In addition to these products, you might also want to ask about our chlorine free Gentle Swim line of pool care products—a completely new system for treating your pool. A safer and easier way.

Step 6. Stop Algae Before It Starts

Algae are a common problem for pool owners. These microscopic plants come into your pool from rain, wind, or even from the skin and hair of swimmers. What starts as a virtually invisible invader can turn your pool into a slimy green mess overnight, or leave unsightly black, brown or yellow patches on pool surfaces.

Luckily, there are ways to head off algae outbreaks. If you have followed these start-up instructions thus far, you have already taken the first step to preventing algae by treating your pool with Clear Result Activator.

Still, we recommend the regular use of an algaecide to insure against algae. As listed below, we offer a variety of algae treatments. Check with your Clear Result dealer for the product that is right for you and follow label directions for start-up and maintenance treatments.

Algae Clear 50 – As the name suggests, this excellent algaecide clears away algae growth. It is a broad-spectrum algaecide and is non-staining and will not affect the balance of your pool water.

Clear Result Polyclear 60 – This highly concentrated algaecide also provides an effective defense against algae growth. It is non-foaming and non-staining.

Mustard Clear – This powerful Bromide does not contain ammonia and effectively removes all forms of algae. It is a particularly powerful Mustard & Black algae killer.

Step 7. Making Water Crystal Clear

Over time, all pool water collects various contaminants such a body oils, cosmetics, suntan lotion and other swimmer wastes, as well as pollen and tiny particles of various types that are too small to be filtered out. Build-up of these contaminants can make your water cloudy and unpleasant, as well as interfere with your ability to sanitize and prevent algae.

Clear Result offers a variety of products to remove these contaminants and leave your water sparkling clear and comfortable.

Shock Treatments
These products oxidize away many of the contaminants that get into your pool. When opening your pool, you should add a shock treatment after balancing the water, following the proper label directions. Shocking is also recommended after a heavy rain or heavy use of the pool. To prevent problems and keep you water clean and clear, shock at least once a week. Always carefully follow label directions.

Here are the shock options offered by Clear Result:
Clear Result Power Clear – This is our premiere and patented shock treatment and is recommended for its ability to clear the water of many of the contaminants that build up in your pool water while adding a maintenance dose of Clear Result Activator to aid in preventing problems.

Chlorine Free Oxidizing Shock – For a quick solution, this chlorine free shock effectively oxidizes wastes with the added benefit of allowing swimmers to resume enjoying the pool just 15 minutes after the treatment is added. It is safe for all pool surfaces and won’t bleach pool liners.

Clear Result Quick Shock – This is the basic, traditional shock for use in swimming pools. It is highly effective at oxidizing wastes that build up in pool water.

Clear Result Superfloc Clarifier – This Product binds microscopic particles in your pool water together so that they are large enough to be removed by the filter and backwashed or cleaned out of your pool. Superfloc clarifier does not know the difference between dirt and algae and is not affected by shock treatments. It prohibits algae occurrence by physically removing algae spores. Follow label directions for start-up.

Step 8. Solving Problems

Troubleshooters - The complete line of Clear Result troubleshooters will ensure any problems that may arise will be easily and economically solved.

Clear Result Pool Rescue – This is a special treatment for clearing up severe fouling problems, including white water mold and pink fungi slime.

Stain and Scale Remover – Effectively removes metals from pool water by crystallizing the particles for removal through the filtration. Will also remove unsightly metal stains and scale from pool surfaces. Helps to lower Calcium hardness levels.

Clear Result Sand Filter Aid – A specially formulated sand filter concentrate that increases filter efficiency by penetrating the sand with a highly effective polymer formula.

Clear Result Superfloc – This highly concentrated clarifier drops cloud causing particles that have formed in the swimming pool water and are too small to be trapped in the filter to the bottom to be vacuumed to waste.

Clear Result Pool and Tile Cleaner – Is a professional strength cleaner for removing oily film, scale and soiling from tile and vinyl surfaces while leaving a microscopic protective layer.

See your authorized Clear Result dealer for our variety of special products for troubleshooting any problems that may arise during the season.

Step 9. The Final Step: Enjoyment!

Those are the basic steps for starting and maintaining your pool, so now it’s time to enjoy!

We suggest that you test the water weekly to check for proper chemical levels. Also, bring a water sample to your Clear Result dealer every 4-6 weeks for an in-depth analysis. See your authorized Clear Result dealer for advice on regular maintenance during the swimming season.

The Clear Result promise is to offer you "The Clear Choice in Pool Care." By following your Clear Result dealer's advice, you will spend more time enjoying your pool and less time working on it.

So what are you waiting for? Go enjoy your beautiful pool with family and friends.